Post by threegpsi on Mar 17, 2009 10:08:19 GMT -7
Guys they are a little under a year old and have been taken care of. The package will include a pressure switch and relays.
I would like to see $400 plus shipping for these. They are sold on Ebay for $179 or $330 for the dual pack.
I will break the set up at 2 each for $250 plus shipping.
They will be shipping after the 28th of this month. I would like payment now but will accept a non-refundable good faith deposit of 25% of the purchase price ($100 for all four, $63 for a 2 pack) to hold them for you until the 28th.
Here are the specs on the 450 series:
450C Air Compressor
• 12-Volt• 12-Volt
• Permanent Magnetic Motor
• Duty Cycle: 100% @ 100 PSI
• Max. Working Pressure: 150 PSI
• Amp Draw: 19 Amps
• Min. Ambient Temp: -40° F
• Max. Ambient Temp: 158° F
• Dimensions: 11.25 ” L x 4.00” W x 7.00” H
• Net Weight: 9.75 lbs. mp: 158° F
• Dimensions: 11.25 ” L x 4.00” W x 7.00” H
• Net Weight: 9.75 lbs.
450C Tank Fill Rates
2.5 Gallon TankFill Rate
0 To 105 PSI1 Min. 55 Sec.
0 To 145 PSI3 Min. 02 Sec
85 To 105 PSI28 Seconds
110 To 145 PSI59 Seconds
5 Gallon TankFill Rate
0 To 105 PSI4 Min. 20 Sec.
0 To 145 PSI6 Min. 40 Sec.
85 To 105 PSI58 Seconds
110 To 145 PSI2 Min. 11 Sec.
I can provide pictures of them after Thursday when I go too see my car. However, this is what they look like:
**Note these are not meant to work with the UAS kits. There working pressure is not high enough for that kit. They are perect for AirRide kits though, which I will be selling my used kit very shortly. This is a perfect way to start building a kit
I would like to see $400 plus shipping for these. They are sold on Ebay for $179 or $330 for the dual pack.
I will break the set up at 2 each for $250 plus shipping.
They will be shipping after the 28th of this month. I would like payment now but will accept a non-refundable good faith deposit of 25% of the purchase price ($100 for all four, $63 for a 2 pack) to hold them for you until the 28th.
Here are the specs on the 450 series:
450C Air Compressor
• 12-Volt• 12-Volt
• Permanent Magnetic Motor
• Duty Cycle: 100% @ 100 PSI
• Max. Working Pressure: 150 PSI
• Amp Draw: 19 Amps
• Min. Ambient Temp: -40° F
• Max. Ambient Temp: 158° F
• Dimensions: 11.25 ” L x 4.00” W x 7.00” H
• Net Weight: 9.75 lbs. mp: 158° F
• Dimensions: 11.25 ” L x 4.00” W x 7.00” H
• Net Weight: 9.75 lbs.
450C Tank Fill Rates
2.5 Gallon TankFill Rate
0 To 105 PSI1 Min. 55 Sec.
0 To 145 PSI3 Min. 02 Sec
85 To 105 PSI28 Seconds
110 To 145 PSI59 Seconds
5 Gallon TankFill Rate
0 To 105 PSI4 Min. 20 Sec.
0 To 145 PSI6 Min. 40 Sec.
85 To 105 PSI58 Seconds
110 To 145 PSI2 Min. 11 Sec.
I can provide pictures of them after Thursday when I go too see my car. However, this is what they look like:
**Note these are not meant to work with the UAS kits. There working pressure is not high enough for that kit. They are perect for AirRide kits though, which I will be selling my used kit very shortly. This is a perfect way to start building a kit