Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 18, 2011 15:55:57 GMT -7
Testing waters to see if there is an interest in 2- 20x9 inch 300C SRT8 with 275/45/20 Nitto NT555R Drag Radials. Asking $400 for the complete set. That is rims & tires.
Nothing is wrong with setup, just looking to upgrade to a 20x10 Rim, so I can fit 315s on rears.
Rims are in decent shape, they arent bent and rims are straight as an arrow. Drag Radials tires are in good shape an have at least 40-65 or so passes left.
If you need pics, let me know. Its the same set up I have used 4/16 test & tune & 5/13 club night.
Also have 2-17"x8" Stellies that came off Magnum. This do not have tires mounted. These rims do not have hub caps. They are straight and bent free. I was thinking $30 for the pair.
Widest tire you can safely put on rim is 235.
|
|
|
|
Post by STEVESRT on May 18, 2011 16:28:07 GMT -7
Do you think they would fit my Challenger, if so "sold"
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 18, 2011 16:37:15 GMT -7
Do you think they would fit my Challenger, if so "sold" Hey Steve, Yes they will fit the Challenger! Now I just need to see if the set up I am looking at, is still for sale. Keeping fingers crossed. I will let you know as soon as I hear back. Thanks again Chris. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 18, 2011 17:07:04 GMT -7
Steve he is checking on shipping, and I am checking out clearance issues. 315 dont rub on R/Ts but may run on SRT8 because they are slightly lowered. I know Dave(Pogo) is currently running 315 rears without any rubbing issues and they guy I am buying the set from is also running his on Charger R/T.
I wonder if this is possible because the R/Ts arent as low as the SRTs. Any SRT8 owners running 315 wide tires or wider please chime in.
|
|
|
|
Post by STEVESRT on May 18, 2011 17:41:48 GMT -7
Sounds good,Let me know.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 18, 2011 17:49:02 GMT -7
PM Sent, but if I decide to go with a more aggressive track set up like full on Slicks, I will let you know. Of course, I will probably have to beef up my current 226mm halfshafts or at least have upgrade 1400HP DSS halfshaft part in hand. First I should probably figure out this darn Electronic Control System issue that hates me so much  But if you want to give em a try to see if it helps with wheel spin, you are more than welcome to try em out at the track. It has helped me, but I still have a little bit of spin some runs and alot of bite on other runs. |
|
|
|
Post by 1sikcharger on May 18, 2011 18:12:01 GMT -7
thats a great price glwts
|
|
|
|
Post by STEVESRT on May 18, 2011 20:16:11 GMT -7
PM sent
|
|
|
|
Post by ponch79 on May 18, 2011 20:23:01 GMT -7
Testing waters to see if there is an interest in 2- 20x9 inch 300C SRT8 with 275/45/20 Nitto NT555R Drag Radials. Asking $400 for the complete set. That is rims & tires. Nothing is wrong with setup, just looking to upgrade to a 20x10 Rim, so I can fit 315s on rears. Rims are in decent shape, they arent bent and rims are straight as an arrow. Drag Radials tires are in good shape an have at least 40-65 or so passes left. If you need pics, let me know. Its the same set up I have used 4/16 test & tune & 5/13 club night. Also have 2-17"x8" Stellies that came off Magnum. This do not have tires mounted. These rims do not have hub caps. They are straight and bent free. I was thinking $30 for the pair. Widest tire you can safely put on rim is 235. Corrections on the 17x8 if I could Chris. Safe set up on them is a 275/40/17 info was from Jon from M&H. Can we get pics on the 17x8 or what? |
|
|
|
Post by ponch79 on May 18, 2011 20:24:33 GMT -7
Thats cool as hell for you to let people try them out Chris
KARMA BRO!!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 19, 2011 17:15:45 GMT -7
Testing waters to see if there is an interest in 2- 20x9 inch 300C SRT8 with 275/45/20 Nitto NT555R Drag Radials. Asking $400 for the complete set. That is rims & tires. Nothing is wrong with setup, just looking to upgrade to a 20x10 Rim, so I can fit 315s on rears. Rims are in decent shape, they arent bent and rims are straight as an arrow. Drag Radials tires are in good shape an have at least 40-65 or so passes left. If you need pics, let me know. Its the same set up I have used 4/16 test & tune & 5/13 club night. Also have 2-17"x8" Stellies that came off Magnum. This do not have tires mounted. These rims do not have hub caps. They are straight and bent free. I was thinking $30 for the pair. Widest tire you can safely put on rim is 235. Corrections on the 17x8 if I could Chris. Safe set up on them is a 275/40/17 info was from Jon from M&H. Can we get pics on the 17x8 or what? I stand corrected, they are 17x7, either way Tony, they arent wide enough to get a decent slick on it, more of a spare tire set up. |
|
|
|
Post by ponch79 on May 19, 2011 18:39:29 GMT -7
Yep, 17x7 is a big difference for any type slick. So have these sold yet ?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 20, 2011 7:30:53 GMT -7
Yep, 17x7 is a big difference for any type slick. So have these sold yet ? 17s still for sale, 20s are on hold, cause the 315s Vipers wont fit without 3/8 spacers and the price of the 315 Vipers are a little out of my reach. |
|
|
|
Post by BENISASPUD on May 20, 2011 17:51:36 GMT -7
What kind of 315s are you getting? Mine were made by Lexani and they were around $120/tire with my contact down in Vegas.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 22, 2011 10:27:40 GMT -7
What kind of 315s are you getting? Mine were made by Lexani and they were around $120/tire with my contact down in Vegas. The tires are Nttto NT05R 315/35/20. They wouldnt be my every day driving tire, track tires and I wish I could get these for $120 each. |
|
