toddrx
Toddler
LX = SCCA F-Stock
Posts: 81
|
Post by toddrx on Jun 19, 2010 22:19:21 GMT -7
I am trying to figure out how to get rid of transitional body roll out of my 2009 Challenger R/T (when I quickly change direction as in a slalom). If I can get SRT8 springs and shocks I can stay in SCCA F Stock class.
Has anybody put SRT8 springs and shocks on an R/T?
If it's possible I would love to find a set from someone who has upgraded to Eibach or something else!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 20, 2010 6:21:04 GMT -7
I am trying to figure out how to get rid of transitional body roll out of my 2009 Challenger R/T (when I quickly change direction as in a slalom). If I can get SRT8 springs and shocks I can stay in SCCA F Stock class. Has anybody put SRT8 springs and shocks on an R/T? If it's possible I would love to find a set from someone who has upgraded to Eibach or something else! I believe Dave (Pogo) has replaced his R/T spings with SRT8 Springs & Struts and Shocks. Send him a PM, but hopefully he will chime in! Hey Todd, which braces bars have you installed? Keep us posted. |
|
|
|
Post by MikEy on Jun 20, 2010 12:14:28 GMT -7
From what i understand the sway bars deal with the body roll.
|
|
|
|
Post by 440Gordy on Jun 20, 2010 13:57:58 GMT -7
I know that sixspeed just up graded his suspension on his SRT8 Challenger. I don't know what his plans are for his old SRT8 set up, but you might want to PM him and see.
|
|
|
|
Post by MoNoChRoMaTiC (Patrick) on Jun 20, 2010 14:13:57 GMT -7
like Mikey said you should for sure look into the difference (if there is one) on the stock sway's between the SRT and R/T, sway bars make a huge difference, a good Hotchkis setup with some coilovers would be a 1000 percent improvement but i see you wanna stay SCCA F Stock class so thats out!
|
|
|
|
Post by MoNoChRoMaTiC (Patrick) on Jun 20, 2010 14:33:46 GMT -7
just looked up the sways:
Stock RT/SRT sway bars appear to be the same
Front - 30mm
Rear - 15 mm
Mopar Performance
Front bar is 1.25" (32mm)
Rear bar is .750" (19mm)
i dont know what rules and regulations are in place for factory performance parts and if you could use "Mopar Performance" parts or not??? if you can Mopar has staged kits with coilovers etc that would set your ride!
|
|
toddrx
Toddler
LX = SCCA F-Stock
Posts: 81
|
Post by toddrx on Jun 21, 2010 4:42:57 GMT -7
I know that sixspeed just up graded his suspension on his SRT8 Challenger. I don't know what his plans are for his old SRT8 set up, but you might want to PM him and see. Thanks for the tip. I e-mailed him. Hopefully he has them! |
|
toddrx
Toddler
LX = SCCA F-Stock
Posts: 81
|
Post by toddrx on Jun 21, 2010 4:44:39 GMT -7
just looked up the sways: Stock RT/SRT sway bars appear to be the same Front - 30mm Rear - 15 mm Mopar Performance Front bar is 1.25" (32mm) Rear bar is .750" (19mm) i dont know what rules and regulations are in place for factory performance parts and if you could use "Mopar Performance" parts or not??? if you can Mopar has staged kits with coilovers etc that would set your ride! In order to stay in class I need to be stock. However the SRT & R/T are both in the same class so I can use any stock challenger parts... |
|
toddrx
Toddler
LX = SCCA F-Stock
Posts: 81
|
Post by toddrx on Jun 21, 2010 4:45:53 GMT -7
After this weekend in Wendover I am now the championship points leader for F-Stock in the Utah Region of SCCA....
|
|
|
|
Post by EddyRican on Jun 21, 2010 7:14:50 GMT -7
that's awesome!! congrats
|
|
|
|
Post by Pogo (Dave) on Jun 21, 2010 7:48:38 GMT -7
After this weekend in Wendover I am now the championship points leader for F-Stock in the Utah Region of SCCA.... That's awesome! Congrats and I hope you maintain the lead! |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 21, 2010 12:17:42 GMT -7
After this weekend in Wendover I am now the championship points leader for F-Stock in the Utah Region of SCCA.... That's awesome! Congrats and I hope you maintain the lead! Great Job Todd!! Congrats! Way to represent the Mopars! |
|
|
|
Post by MoNoChRoMaTiC (Patrick) on Jun 21, 2010 13:43:49 GMT -7
way to go Todd!!!!!! Congratulations, keep it up!
|
|
toddrx
Toddler
LX = SCCA F-Stock
Posts: 81
|
Post by toddrx on Jun 21, 2010 21:53:01 GMT -7
I know that sixspeed just up graded his suspension on his SRT8 Challenger. I don't know what his plans are for his old SRT8 set up, but you might want to PM him and see. Still looking. sixspeed has them but is keeping them (for restoration if needed). Any leads for a set of gently used springs would be great. Thanks for the help! |
|
