|
Post by kiddcharger on Aug 1, 2010 13:39:14 GMT -7
i was wondering if the 300 srt8 is the SAME as the charger srt8 suspension, meaning handling, and drop etc. i own a charger SXT v6 and i was going to buy a 300 srt8 suspension. will it fit? and will it have the same stance and driving as the charger srt8
|
|
|
Post by drewswagnum on Aug 1, 2010 13:48:10 GMT -7
Dont Forget to introduce yourself in the top thread... haha
|
|
|
Post by greg095 on Aug 2, 2010 6:22:37 GMT -7
Yes, the 300SRT suspension will fit your Charger. All you really need is the springs though. Unless your looking to replace the front struts and the rear shocks as well. If you are, another thing to think about is, depending on the year SRT, it might have the Nivomat self leveling rear shocks. Not a big deal if you use them, just something to think about.
|
|
|
Post by stonecold on Aug 2, 2010 7:54:13 GMT -7
I read on a few of the forums that the front end actually sits higher because of the spring ration with the V6 being a lighter engine, I was looking into doing this same swap but after reading that I changed my mind. But correct me if I'm wrong none-the-less.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 2, 2010 8:12:58 GMT -7
i was wondering if the 300 srt8 is the SAME as the charger srt8 suspension, meaning handling, and drop etc. i own a charger SXT v6 and i was going to buy a 300 srt8 suspension. will it fit? and will it have the same stance and driving as the charger srt8 Welcome, I am sure it can be done, but it may be cheaper and all around better to find an aftermarket setup that performs just as well if not better. Like Richard ( stonecold) mention you dont want your to be up high in the front. Beside, I know the eibach springs look great on Ty Red SXT Charger. Good Luck and keep us posted.
|
|
|
Post by greg095 on Aug 2, 2010 8:40:03 GMT -7
I have heard the same about the front end. Never seen it confirmed in person or pictures. It makes sense however, due to the extra weight from the 6.1.
|
|