|
|
Post by phantasm on Sept 20, 2011 15:21:17 GMT -7
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 20, 2011 17:17:37 GMT -7
Looks Great Sean, Really Diggin the 300SRT wheels on the SRT Magnum! Hope you bring er out to the Cruise along with the Challenger!
|
|
|
|
Post by Capone on Sept 20, 2011 17:28:28 GMT -7
I think it looks great!
|
|
|
|
Post by DartBoy01 on Sept 20, 2011 18:27:57 GMT -7
Looks Great Sean, Really Diggin the 300SRT wheels on the SRT Magnum! Hope you bring er out to the Cruise along with the Challenger! No way! The Magnum can go, but instead of the Challenger bring the truck! |
|
|
|
Post by MoNoChRoMaTiC (Patrick) on Sept 20, 2011 19:57:44 GMT -7
Looks Great Sean, Really Diggin the 300SRT wheels on the SRT Magnum! Hope you bring er out to the Cruise along with the Challenger! No way! The Magnum can go, but instead of the Challenger bring the truck! sadly if memory serves Sean no longer has the SRT 10  the Maggie is looking fantastic brother! all mopars are safe in your dedicated caring hands! you have superb taste and mod you're rides to perfection! |
|
|
|
Post by 1sikcharger on Sept 20, 2011 20:49:40 GMT -7
that looks good sean very clean the hood looks great
|
|
|
|
Post by Pogo (Dave) on Sept 20, 2011 20:57:00 GMT -7
Hey Sean, weren't you supposed to call me when your hood came in so I could help?...
Uh yeah, I must've missed the memo on that... LOL
She looks great!
|
|
|
|
Post by alpinewil81 on Sept 21, 2011 8:12:14 GMT -7
Hood looks sweet. I agree with Chris, them wheels are sharp.
One question... rather than paint the trim BB, why not pop them off and use a black overlay? The reason I ask is we did that on an SRT here and the chrome plastic didn't bind paint well. Let me clarify that, the primer stayed... but the BB didn't and it just chipped and flaked. But hey... we could have just had bad paint base at the shop when we did it too since it didn't bind. Instead we unsnapped the pieces and used a carbon fiber trim piece someone online made and laid it into the bumper. Looked effen awesome!!! Just a thought since your hood is carbon too? That way your chrome pieces can be installed later.
But no matter what, I like the smooth it out idea!
|
|
|
|
Post by phantasm on Sept 21, 2011 12:32:42 GMT -7
Thnx guys  I did call you lol and texted you, ugh my phone is worse off than I thought, I'll see if I am able to upgrade yet >.< I did sell the SRT 10, I had no place to put it other then the RV pad and thats bad juju in winter, it needed an entire btake system replacement and the offer was more then I had into it so we decided to let it go. Thanks Patrick Ahhh very nice idea Alpine I'll look into that, I have a silver interior kit in Maggie but am replacing it with 3K weave CF so it would go well to have those trim parts in CF as well. I'm considering haveing the "MOPAR" done in DiNoc (3M CF type) not sure tho any thoughts ? My BT front a rear badges are on the way shipper yesterday I chose the tribal ram design. I know it will get asked so I'll give a heads up  I'm shooting for a middle ground between the Super Bee and Maggies mildly modded power. The numbers we are looking to achieve are 550 rwhp all motor and over built for longevity pretty much a copy of the BEE's stage 3+ 426 stroker motor less the SC. On the more mild side a cam / head package with ported intake and tb with a tune from Karl ( Janell likes this idea much much better) Oh well we'll see what happens over the winter. |
|
|
|
Post by jw97neon on Sept 21, 2011 17:59:16 GMT -7
lov it... it kinda reminds me of mine lol... can't wait to see her when you get it finished
|
|
|
|
Post by swtchgr(Kellie) on Sept 21, 2011 20:42:37 GMT -7
Looks great Sean. What is BB? Is overlay the same as a wrap? Not a big fan of wraps. They look pretty nice far, far away but up close, ugh!
|
|
|
|
Post by Pogo (Dave) on Sept 21, 2011 22:05:35 GMT -7
I'm guessing that BB is short for brilliant black.
|
|
|
|
Post by phantasm on Sept 22, 2011 14:43:33 GMT -7
That's correct, Brilliant Black. No worries Kellie I'm ot a fan of wraps myself, I've seen some really nice ones but they cost about as much as a paint job and the rest do look shoddy up close, so no wraps for Maggie it suffered a wrap before I bought it from just above the door handles over the top. My guess is it was a two tone concept from what I know of the car the wrap was done in silver. I removed the "MAGNUM" from the back door and used self etching primer and painted the trim on the front and rear facia, this is only a temp thing till I decide what body mods are being done Hmmmm ? I wonder what could I be thinking of doing lol sry ya'll will have to wait and see. Janell and I talked over the engine mods and have decided to just do heads and cam, with a nice tune from Karl.
|
|
|
|
Post by TJ on Sept 22, 2011 15:54:44 GMT -7
 here is the hemi I did with a free sample from vinyl decals |
|
|
|
Post by phantasm on Sept 22, 2011 18:14:56 GMT -7
here is the hemi I did with a free sample from vinyl decals You have my attention  ...... lol I'm a CF junkie and thats nice work. |
|
the Maggie is looking fantastic brother! all mopars are safe in your dedicated caring hands! you have superb taste and mod you're rides to perfection!
I did call you lol and texted you, ugh my phone is worse off than I thought, I'll see if I am able to upgrade yet >.<
I'm shooting for a middle ground between the Super Bee and Maggies mildly modded power. The numbers we are looking to achieve are 550 rwhp all motor and over built for longevity pretty much a copy of the BEE's stage 3+ 426 stroker motor less the SC. On the more mild side a cam / head package with ported intake and tb with a tune from Karl ( Janell likes this idea much much better) Oh well we'll see what happens over the winter. 
2006 R/T. Chin spoiler, front blinker mod, blastin bob's reso deletes 
...... lol I'm a CF junkie and thats nice work.