|
|
Post by reddog on Feb 6, 2012 22:29:49 GMT -7
So, this year for my birthday, I've decided on giving the Charger it's growl. Ordered the Flowmaster Super 44's last Friday, should be getting them this week, and install this weekend. Have plans for Blastin' Bob's resonator deletes, but we'll start with 44's and see how they sound. Yay!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 6, 2012 22:40:19 GMT -7
Congrats !! That is awesome. Hope to hear it at the March 3rd M&G.
|
|
|
|
Post by Pogo (Dave) on Feb 6, 2012 22:43:53 GMT -7
Definitely interested in hearing the set up. Congrats!
|
|
|
|
Post by 1sikcharger on Feb 6, 2012 23:32:48 GMT -7
You was so excited u forgot a letter ha just messing with you
|
|
|
|
Post by Capone on Feb 7, 2012 12:39:32 GMT -7
Can't wait to hear it! Congrats
|
|
|
|
Post by alpinewil81 on Feb 7, 2012 16:26:29 GMT -7
Dude... you will want the resonator deletes. I have the 7db kit with Mandrel bends and boy did it make a huge difference. Once I put my Magnaflows on and the warmed up and broke in it sounds freaking amazing. Unfortunatley being the Magnum is a hatch back wagon, I get a lot of drone now that the system has truly heated up and is broke in. In a Charger this shouldn't be an issue.
|
|
|
|
Post by reddog on Feb 7, 2012 20:18:26 GMT -7
Thanks everyone. And yeah, Alpine, deletes are part of the plan, just have to go at it little by little, as we are planning on buyin' a house this year.
|
|
|
|
Post by Amanda on Feb 7, 2012 21:44:33 GMT -7
Oooh nice. I want to get an exhaust on the Challenger, just don't want to pay for it! Maybe this summer...
|
|
|
|
Post by reddog on Feb 11, 2012 18:49:09 GMT -7
Wow, got em on today. Didn't think it was gonna take as long as it did, but also did more than I planned. So before I did any cutting, I found out that the tubing to the "suitcase" was actually 2-1/4 OD instead of the 2-1/2" OD I was planning on (this means the out size of the tubing was 2-1/4 OD as well). Went and got some adapters made to go from 2-1/4 ID to 2-1/2" OD to fit in the Flowmasters. Got the "suitcase" replaced with a little modifying and welding of a couple of the adapters, as there wasn't as much room for the adapters as I had originally calculated. Welded it all in, with the help of one, Mr. Rob Staker, and then fired the beast up. Was really disappointed in the results, as it was only slightly more throaty than stock. Next step, cut out the resonators and see if the difference is unbearable. By far, this was the result I had anticipated. Welded in some pipe, now just have to get a hold of some MBRP exhaust tips to finish it off. The end result is a far cry from the stock setup, but isn't too loud to be unbearable. Don't get me wrong, when the drone kicks in, it is slightly annoying, not because of the vibrations, but just the fact that a Hemi shouldn't sound like that, lol. On a side note, I got to take a ride along in a SuperBee. It'll make you smile.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 12, 2012 14:36:57 GMT -7
Wow, got em on today. Didn't think it was gonna take as long as it did, but also did more than I planned. So before I did any cutting, I found out that the tubing to the "suitcase" was actually 2-1/4 OD instead of the 2-1/2" OD I was planning on (this means the out size of the tubing was 2-1/4 OD as well). Went and got some adapters made to go from 2-1/4 ID to 2-1/2" OD to fit in the Flowmasters. Got the "suitcase" replaced with a little modifying and welding of a couple of the adapters, as there wasn't as much room for the adapters as I had originally calculated. Welded it all in, with the help of one, Mr. Rob Staker, and then fired the beast up. Was really disappointed in the results, as it was only slightly more throaty than stock. Next step, cut out the resonators and see if the difference is unbearable. By far, this was the result I had anticipated. Welded in some pipe, now just have to get a hold of some MBRP exhaust tips to finish it off. The end result is a far cry from the stock setup, but isn't too loud to be unbearable. Don't get me wrong, when the drone kicks in, it is slightly annoying, not because of the vibrations, but just the fact that a Hemi shouldn't sound like that, lol. On a side note, I got to take a ride along in a SuperBee. It'll make you smile. Glad to hear you got it all worked out to your liking! Post sound clip or even better yet come out to the AutoRama Meet & Greet so we can hear her roar  BTW, whose SuperBee? Newer or older? either way, I can see how the superbee would make anyone smile! Whats not to smile about when you got alot of HP and great style to boot. Love me some SuperBees. |
|
ChallengeIT
Teenager
Make The Most Of What You HAVE!
Posts: 197
|
Post by ChallengeIT on Feb 13, 2012 15:26:29 GMT -7
Its like Music to my ears to that throaty exhaust sound
|
|
|
|
Post by jc4041 on Feb 16, 2012 2:51:18 GMT -7
we tried the whole res delete on the SRT since the suitcase is freeflow......ended up going with CherryBomb Extremes  .....the Ram and the SRT are sporting Extremes....Hemi's are meant to be heard before being seen oh....the 6.1's have no drone  |
|
.....the Ram and the SRT are sporting Extremes....Hemi's are meant to be heard before being seen