|
|
Post by tymaughan on May 30, 2013 14:26:15 GMT -7
Has anybody had any luck with a good non adjustable lower ball joint and if so which one.
|
|
|
|
Post by tymaughan on Jun 1, 2013 10:02:38 GMT -7
I found a non adjustable ball joint for an 08, do you guys think this would fit.
|
|
|
|
Post by alpinewil81 on Jun 27, 2013 21:00:40 GMT -7
What I've learned for the cost of a ball joint, unless you do it yourself, you're better off just buying a control arm assembly and getting all new bushings as well. At least that's how us AWD's are... go hit up the national forum and run a search there or at the Charger forum, I bet you find a lot of input on this topic there.
|
|
|
|
Post by gomango on Jun 28, 2013 9:24:33 GMT -7
I agree, just buy the controll arm. It's an easy job to do yourself and I believe it only cost $170 and I went with moog.
|
|
|
|
Post by tymaughan on Jul 3, 2013 19:13:49 GMT -7
Thanks for the input guys.
|
|
|
|
Post by alpinewil81 on Aug 3, 2013 21:46:13 GMT -7
Sooo... I saw you had another post about the lower control arm breaking back in 2011. What was the story back then? I assume that was a hard lesson learned as to why if you drive the RWD model cars that simply replacing the entire arm is much easier than just the joint.
I hope you got it all figured out since we haven't heard back for a while on this topic.
|
|
