|
|
Post by jlawless on Aug 17, 2009 11:54:18 GMT -7
Is it hard to tint the tails with VHT? I'm skeptical about it...Mainly I just don't want any uneven-ness or anything like that. Are those even things to worry about or does it go on pretty even?
|
|
|
|
Post by BENISASPUD on Aug 17, 2009 14:01:10 GMT -7
VHT is very easy to spray on. If there any parts end up being uneven, you just need to get a 800 or 1000 grit sandpaper and sand it down and spray it again. Then finish it up with Duplicolor Top Clear Coat.
|
|
|
|
Post by jlawless on Aug 17, 2009 14:22:20 GMT -7
Is it hard to get the headlights off if I wanted to spray them too?
|
|
|
|
Post by MikEy on Aug 17, 2009 19:28:11 GMT -7
We just did Richard (2kuickcharger) tailights on one of our little mod days on Sunday. If you havent painted before you might have some problems. To take out the headlights you have to remove the whole fascia. Here is a great writeup. www.chargerforums.com/forums/showthread.php?t=62948Its going to be kinda hard and take like an hour your first try but after you do it once it will be a lot faster. |
|
|
|
Post by 1sikcharger on Aug 17, 2009 19:51:44 GMT -7
Yea it wasn't that hard it was dang eazy
|
|
|
|
Post by MikEy on Aug 17, 2009 21:16:12 GMT -7
Yea it wasn't that hard it was dang eazy Yeah when your not doing any of the work ;D |
|
|
|
Post by BENISASPUD on Aug 17, 2009 21:45:47 GMT -7
I've taken the front fascia off so many times now that I can get it off in about 30 minutes and in about 15 minutes if I had power tools.
|
|
|
|
Post by MikEy on Aug 17, 2009 21:52:11 GMT -7
I've taken the front fascia off so many times now that I can get it off in about 30 minutes and in about 15 minutes if I had power tools. I bet you and i can do it in less than 15  |
|
|
|
Post by BENISASPUD on Aug 18, 2009 11:22:22 GMT -7
oh yeah, for sure. If there are two people working on it, we can get it off in 15 minutes easy.
|
|
|
|
Post by Pogo (Dave) on Aug 18, 2009 19:24:21 GMT -7
Is there some place local that sells VHT? I had to buy it online last time.
|
|
|
|
Post by MikEy on Aug 18, 2009 21:18:14 GMT -7
API speed shop
Karl Krohn
API Speed Shop
8700 S State St
Sandy, UT 84070
Pep Boys in Sandy
The speed shop on redwood
i dont know anywhere that sells around you. I would check to see if you have a pep boys local to you.
|
|
